Product Information

How to charge the device?

The device can be charged by putting the device on the NFC charger or using a standard USB cable added to the packaging. To connect the cable to the device, gently pull the clip located on the back of the device next to the diodes, and then slide the device in the opposite direction from the position of the clip.

In the separated upper part of the device on the back side there is a mini USB port to which you can connect the cable.

 

How to charge:

 

 

  1. Turn the device off with the ON / OFF button, press the button for 1 second. The button will not turn off the unit when charging wired or wirelessly.
  2. Remove the cover of the USB socket.
  3. Plug the micro USB cable supplied with the device into the micro USB socket of AioCare and connect it to a power source (any USB port), the LEDs at the top of AioCare should flash to show the current battery level.
  4. When the device is fully charged, 8 LEDs are switched on.

 

Contact

Still have questions?